31 11 Front axle support
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - FRONT AXLE SUPPORT
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Front axle support, middle, to body | R55/R56/R57/R60 | M12 | 100 Nm | |
| 2AZ Rear end of front axle support to body | R55/R56/R57/R60 | M12 | 100 Nm | |
| 3AZ Holder, front bumper, to front axle support | R55/R56/R57/R60 | M12 | 100 Nm | |
| 4AZ Holder, wishbone rubber mount, to front axle support | R55/R56/R57/R60 | M14 | 165 Nm | |
| 5AZ Holder, wishbone rubber mount, to body | R55/R56/R57/R60 | M10 | Replace screws. Jointing torque Angle of rotation |
59 Nm 90° |