31 35 Anti-roll bar
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - ANTI-ROLL BAR
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Anti-roll bar link to anti-roll bar | R55/R56/R57 | M10 | Replace nut. | 56 Nm |
| R60 | M10 | Replace nut. | 60 Nm | |
| 2AZ Anti-roll bar link to spring strut shock absorber | R55/R56/R57 | M10 | Replace nut. | 56 Nm |
| R60 | M10 | Replace nut. | 60 Nm | |
| 3AZ Holder, wishbone rubber mount, to front axle support | R55/R56/R57/R60 | M14 | 165 Nm |