24 11 Transmission Housing, Oil Sump
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - TRANSMISSION HOUSING, OIL SUMP
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Drain plug to oil sump/transmission | R55/R56/R57/R60 | M10 | 27 Nm | |
| R55/R56/R57/R60 | M18 | 25 Nm | ||
| 2AZ Oil filler plug to transmission housing | R55/R56/R57/R60 | M14 | 25 Nm | |
| 3AZ Oil sump to transmission | R55/R56/R57/R60 | M6 | 8 Nm | |
| 4AZ Transmission to engine | R55/R56/R57/R60 | M10 | 38 Nm | |
| 5AZ Gearshift mount on transmission | R55/R56/R57/R60 | M8 | 19 Nm | |
| 6AZ Selector lever to shaft | R55/R56/R57/R60 | M8 | 12 Nm | |
| 7AZ | ||||
| 8AZ AISIN gear selector cable to clamping piece | R55/R56/R57/R60 | M8 | 12 Nm | |
| 9AZ AISIN converter, transportation retainer | R55/R56/R57/R60 | M12 screw | 17 Nm | |
| R55/R56/R57/R60 | M10 nut | 7 Nm | ||
| 10AZ AISIN screw connection Oil strainer | R55/R56/R57/R60 | Screw M6 | 11 Nm | |
| 11AZ AISIN screw connection, oil cooler | R55/R56/R57/R60 | M12 screw | 35 Nm | |
| 12AZ AISIN screw connection, gear position switch | R55/R56/R57/R60 | Screw M6 | 5.5 Nm | |
| R55/R56/R57/R60 | M14 nut | 7 Nm | ||
| 17AZ AISIN gear selector valve and oil temperature sensor | R55/R56/R57/R60 | M8 nut | 10 Nm | |
| 18AZ AISIN selector unit | R55/R56/R57/R60 | Screw M6 | Jointing torque Angle of rotation |
8 Nm 90° ± 5° |
| 19AZ AISIN input speed sensor EGS multiple pin connector |
R55/R56/R57/R60 | Screw M6 | 5 Nm | |
| 20AZ AISIN output speed sensor | R55/R56/R57/R60 | Screw M6 | 6 Nm | |
| 21AZ AISIN converter to flywheel | R55/R56/R57/R60/N12/N14/N16 | M10 nut | 53 Nm | |
| R55/R56/R57/R60/W16 | M10 nut | 45 Nm |