22 11 Engine mounting
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - ENGINE MOUNTING
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Engine mounting bracket to engine mount | R55/R56/R57/R60 | M12x1.5 - 10.9 nut | 100 Nm | |
| 2AZ Engine mounting bracket to adapter plate | R55/R56/R57/R60 | M10 8.8 screw | 38 Nm | |
| 3AZ Adapter plate to engine | R55/R56/R57/R60 | M10 8.8 screw | 41 Nm | |
| 4AZ Engine mount to body | R55/R56/R57/R60 | M10 10.9 screw | 68 Nm | |
| R55/R56/R57/R60 | M12 8.8 screw | 68 Nm | ||
| 5AZ Holder, anti-roll bar link to engine | R55/R56/R57/R60 | M10 8.8 screw | 38 Nm | |
| 6AZ Anti-roll bar link to holder | R55/R56/R57/R60 | M12x90 screw | 108 Nm | |
| 7AZ Earth cable to engine mounting bracket | R55/R56/R57/R60 | M8 nut | 15 Nm | |
| 8AZ Adapter plate to engine | R55/R56/W16 | M10x75 screw | 55 Nm | |
| 9AZ Anti-roll bar link to front axle support | R55/R56/R57/R60 | M12x90 screw | 108 Nm |