12 51 Plug connections, terminals, loose components
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - PLUG CONNECTIONS, TERMINALS, LOOSE COMPONENTS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Ground connection for ignition coils | N12/N14/N16/N18 | M5 | 5.5 Nm | |
| 2AZ Holder, wiring harness, to crankcase | N12/N14/N16/N18 | M5 x 16 | 5.5 Nm | |
| 3AZ Cable duct to crankcase | N12/N14/N16/N18 | M6 x 16 | 8 Nm | |
| 4AZ Holder, wiring harness duct | N12/N14/N16/N18 | M6 x 16 | 9 Nm |