11 21 Crankshaft and Bearings
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - CRANKSHAFT AND BEARINGS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Torsion damper (hub) to crankshaft | N12 | M14 x1.5 x74 | Replace bolts Lightly oil screws and threads |
|
| Jointing torque | 50 Nm | |||
| Central bolt 10.9 | Angle of rotation | 100 ° | ||
| Central bolt 12.9 | Angle of rotation | 180 ° |