00 00 M4 and M5 - maximum tightening torques acc. to BMW GS 90003-2
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - M4 AND M5 - ACC. TO BMW GS 90003-2
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to excerpt from COMPANY STANDARD BMW GS 90003-2 | Surface colour/(surface coating) | |||
| M4 thread | yellow (ZN) | M4 8.8 | 3 Nm | |
| silver (ZNS) | M4 8.8 | 2 Nm | ||
| yellow (ZN) | M4 10.9 |
4 Nm | ||
| silver (ZNS) | M4 10.9 |
3 Nm | ||
| yellow (ZN) | M4 12.9 |
5 Nm | ||
| M5 thread | yellow (ZN) | M5 8.8 | 6 Nm | |
| silver (ZNS) | M5 8.8 | 5 Nm | ||
| yellow (ZN) | M5 10.9 |
8 Nm | ||
| silver (ZNS) | M5 10.9 |
7 Nm | ||
| yellow (ZN) | M5 12.9 |
10 Nm | ||
| silver (ZNS) | M5 12.9 |
8 Nm |