SI number

WARNING: This page is about a different variant/trim than selected.

01 14 01 (766)

Consisting of:

2 = 0494160 Crimping tool

NOTE: (Crimping head) For stripping insulating and cutting optical fibre to length Replaced as from 03/2010 by 61 4 329, see Service Information (bulletin) 02 01 10 (615). Replaced by 61 4 329 (0 496 847)

6 = 0494164 Supplement

NOTE: (Replacement blade) For face-cutting optical fibres. As from 03/2006 no longer included in set 61 4 320, but individually available as a replacement, see SI 02 01 10 (615)

7 = 0494320 Supplement

NOTE: (Replacement blade) With tool for changing blades in stripping unit. Must be ordered separately, not included in 61 4 320 delivery specification! Discontinued as from 03/2010, see SI 02 01 10 (615).

8 = 0495555 Crimping tool

NOTE: (Universal crimping head) For crimping contacts (without seal) and cable cross-sections from 0.35 - 2.5 mm, see SI 2 04 06 293. As from 03/2010 61 4 328 will not longer be supplied in set 61 4 320. Order by way of separate special tool number 61 4 340, see SI 02 01 10 615

1 = 0494159 Handle

NOTE: Basic handle for crimping heads

3 = 0494161 Crimping tool

NOTE: (Crimping head) For crimping optical fibre contacts

4 = 0494162 Crimping tool

NOTE: (Crimping head) For crimping MQS contacts

5 = 0494178 Crimping tool

NOTE: (Crimping head) For crimping MPQ contacts

2 = 0496847 Crimping tool

NOTE: Replaces special tool 61 4 322 as from 03/2010