13 64 501 Removing and installing/replacing a fuel injector (N12)

WARNING: This page is about a different variant/trim than selected.

Recycling Fuel escapes when fuel line is detached. Catch and dispose of escaping fuel. Observe country-specific waste disposal regulations.

NOTE: This procedure is applicable to all fuel injectors.

Lever out fuses (1).

Pull the fuel injector (2) out off the fuel injection pipe.

Installation note: Replace sealing rings on fuel injectors and coat with rubber care product.

Fig 1: Identifying Sealing Rings On Fuel Injectors

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE:

Assemble engine.

Check fuel system for tightness.

Check stored fault messages.

Delete fault memory.