13 31 028 Checking fuel feed pressure (N12)
WARNING: This page is about a different variant/trim than selected.
Special tools required:
- 13 5 270 . See FUEL SYSTEM - SPECIAL TOOLS -- CLUBMAN .
Necessary preliminary tasks:
- Remove Suction Filter Housing .
- Connect DIS Tester.
Recycling:
Catch and dispose of escaping fuel in a suitable container.
Observe country-specific waste-disposal regulations.
Unlock quick-connect coupling from feed line (1) and disconnect.
Install special tool 13 5 270.
Connect pressure sensor (2) of DIS Tester.
Turn on ignition or activate fuel pump by means of BMW diagnosis system.
Read off fuel feed pressure. See 13 31 FUEL PUMP WITH DRIVE AND PIPE N12 .