11 40 000 Checking engine oil pressure (N14)

WARNING: This page is about a different variant/trim than selected.

Disconnect plug connection on oil pressure switch (1)

Fig 1: Identifying Oil Pressure Switch

Courtesy of BMW OF NORTH AMERICA, INC.

Release oil pressure switch (1) with special tool 11 7 020 .

Tightening torque: 12 61 1AZ .

Fig 2: Identifying Oil Pressure Switch

Courtesy of BMW OF NORTH AMERICA, INC.

Screw in special tool 11 9 560 with sealing ring on cylinder head.

Secure pressure gauge 13 3 063 to special tool 11 9 560 .

Fig 3: Securing Pressure Gauge (13 3 063) To Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Check engine oil pressure with diagnosis tester

Connect special tools 11 9 560 /13 6 054 and 13 6 051.

Check engine oil pressure with pressure gauge

Connect special tools 11 9 560 /13 3 063 and 13 3 061.

Start engine and check engine oil pressure.

Fig 4: Checking Engine Oil Pressure Using Pressure Gauge

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.