17 00 039 Venting cooling system and checking for water leaks
WARNING: This page is about a different variant/trim than selected.
WARNING:
Danger of scalding! Only remove cap when engine has cooled down.
The cooling system is vented during filling.
This operation is described in DRAINING AND ADDING COOLANT .
Check COOLING SYSTEM FOR LEAKS .
Checking coolant level
Allow engine to cool down before checking coolant level.
Coolant temperature must not be more than 30°C.
If ambient temperature exceeds 30°C, wait until engine has cooled down to ambient temperature.
Top up COOLANT .