21 21 Clutch disc and drive plate
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - CLUTCH DISC AND DRIVE PLATE
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Clutch to flywheel | R50 | M7 | Use NEW screws | 20 Nm |
| 2AZ Clutch to flywheel | R53 | M8 | Use NEW screws | 23 Nm |
| 3AZ Clutch to flywheel | R53 | M9 | Use NEW screws | 28 Nm |
| 4AZ Clutch to flywheel | R55/R56/R57 | M8 | Use NEW screws | 28 Nm |
| R55/R56 Cooper D (W16) | M8 | Use NEW screws | 20 Nm | |
| 5AZ Clutch to flywheel | R55/R56/R57 D (N47)/R60 | M8 | Use NEW screws | 28 Nm |