18 40 Exhaust system, complete
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - EXHAUST SYSTEM, COMPLETE
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Exhaust manifold to cylinder head | N12/N14/N16/N18 | M8 | Replace nuts, coat threads with copper paste. | 25 Nm |
| 2AZ Stud to cylinder head | N12/N14/N16/N18 | M8 | 15 Nm | |
| 3AZ Catalytic converter to crankcase | N12/N16 | M8 | 25 Nm | |
| 4AZ Heat shield | N12/N14/N16/N18 | M6 | 4 Nm |