16 11 Fuel Tank and Retaining Elements
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - FUEL TANK AND RETAINING ELEMENTS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Nut/fuel filler pipe to body | R55/R56/R57/R60 | M6 | 6 Nm | |
| 2AZ Service cap to body | R55/R56/R57/R60 | 6 Nm | ||
| 3AZ Tank to rear axle support and body | R55/R56/R57/R60 | M8 | 19 Nm | |
| 4AZ Hose clamp/fuel filling hose | R55/R56/R57/R60 | 3 Nm | ||
| 5AZ Tensioning strap to body | R55/R56/R57/R60 | M8 | 19 Nm |