13 62 Sensors for control unit
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - SENSORS FOR CONTROL UNIT
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Differential-pressure sensor to intake manifold | N12/N14 | M6 x 18 | 5 Nm | |
| 2AZ Knock sensor | N12/N14/N16/N18 | M8 x 125 | 20 Nm | |
| 3AZ Crankshaft sensor | N12/N14/N16/N18 | M5 x 30 | 5 Nm | |
| 4AZ Camshaft sensor | N12/N14/N16/N18 | M6 x 100 | 8 Nm | |
| 5AZ Suction pressure sensor | N14/N18 | M6 x 18 | 5 Nm | |
| 6AZ Temperature and boost pressure sensor | N14/N18 | M6 x 18 | 5 Nm |