11 53 Thermostat and Connections
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - THERMOSTAT AND CONNECTIONS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Thermostat housing to cylinder head | N14 | M6 | 8 Nm | |
| 2AZ Vapor separator to crankcase | N14 | M6x100 | 8 Nm | |
| 3AZ Auxiliary water pump to crankcase | N14 | M6x100 | 8 Nm | |
| 4AZ Banjo bolt for supply and return to turbocharger | N14 | M14x1.5 | Replace sealing ring | 35 Nm |