11 41 Oil Pump with Strainer and Drive
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - OIL PUMP WITH STRAINER AND DRIVE
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Oil pump to bedplate |
N14 |
M8x28 |
|
25 Nm |
| 2AZ Sprocket to oil pump |
N14 |
M8x35 |
Replace screw
Jointing torque
Torque angle |
5 Nm
90 ° |