11 61 Intake manifold
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - INTAKE MANIFOLD
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Intake manifold to cylinder head |
N14 |
M8x125 |
|
15 Nm |
| N14 |
AM7 |
Hexagon nut |
20 Nm |
| 2AZ Bracket to crankcase |
N14 |
M8 |
|
20 Nm |
| 3AZ Bracket to crankcase |
N14 |
M8x125 |
|
20 Nm |