34 52 550 Removing and installing/replacing DSC yaw sensor (DSC sensor)
WARNING: This page is about a different variant/trim than selected.
Necessary preliminary tasks:
- Remove passenger seat . See SEATS - REPAIR INSTRUCTIONS -- CLUBMAN .
- If necessary, remove cover for video module.
- If necessary, partially release floor trim.
Disconnect plug connection (1).
IMPORTANT:
Vibration-sensitive component.
Implement screw connection correctly, otherwise there may be malfunctions in the DSC.
Implement screw connection correctly, otherwise there may be malfunctions in the DSC.
Release nuts (2) and remove DSC sensor.
Installation:
Tightening torque. See 34 51 5AZ. .