34 6 300 Brake piston tool

WARNING: This page is about a different variant/trim than selected.

Minimum set: Mechanical tools

Note: For turning back brake piston when fitting new brake pads, disc brakes front and rear

Series: R50, R52, R53, R55, R56

SI number: 1 05 01 (718)

Order number: 34 6 300

Brake piston tool

Fig 1: Identifying Brake Piston Tool (34 6 300)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 34 6 301 Pin wrench

NOTE: For turning brake piston. Brake: Teves

2 = 34 6 302 Thrust sleeve

NOTE: For fitting rubber sleeve (dia. 63)

3 = 34 6 303 Thrust sleeve

NOTE: For fitting rubber sleeve (dia. 54)

4 = 34 6 304 Thrust member

NOTE: For pressing piston back

5 = 34 6 305 Screw

NOTE: For pressing piston back

6 = 34 6 306 Nut

7 = 34 6 307 Plate

8 = 34 6 308 Spindle (M18x2,5)

9 = 34 6 309 Pin wrench

NOTE: For rotating brake piston on R56. Brake: TRW