72 11 Seat belts
WARNING: This page is about a different variant/trim than selected.
SEAT BELTS TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Height adjuster, seat belt, front - to "B-pillar" | R50/R53 | M8 | 22 Nm | |
| 2AZ Inertia reel device, seat belt, front - to "B-pillar" | R50/R53 | 29 Nm | ||
| R52 / R55 / R56 | 36 Nm | |||
| 3AZ Deflection fitting - to height adjuster | R50 / R53 | M10 | 36 Nm | |
| - to body | R55 / R56 | M10 | 36 Nm | |
| 4AZ Seat belt, front, anchor fitting, sliding rail | R50 / R52 / R53 | 36 Nm | ||
| R55 / R56 | Duo-Taptite screw coated with microGLEIT DF 921 | 36 Nm | ||
| 5AZ Inertia reel device, seat belt, rear | ||||
| - outer to C-pillar | R50 / R52 / R53 / R55 / R56 | 36 Nm | ||
| - middle to side belt retainer holder | R55 | 36 Nm | ||
| 6AZ Belt deflection fitting for rear cabin seat belt - to "C-pillar" | R50 / R52 / R53 / R55 / R56 | 36 Nm | ||
| 7AZ Anchor fitting, rear seat belt | R50 / R52 / R53 / R55 / R56 | 36 Nm | ||
| 8AZ Buckle (lower strap), rear seat belt | R50 / R52 / R53 / R55 / R56 | M10 | Duo-Taptite screw | 36 Nm |
| 9AZ Lower fitting (belt tensioner), seat belt, front | R50 / R53 | M10 | 45 Nm | |
| R55 / R56 | M10 | 36 Nm | ||
| 10AZ Corner hoop to body (B-pillar) | R52 | 25 Nm | ||
| 11AZ Belt guide loop | R52 | 11 Nm |