00 00 610 Engine oil service incl. supplementary service (N12)

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: It is essential to adhere to the exact filling capacities specified.
Overfilling the engine with engine oil will result in engine damage .
Checking and drip-off times must be observed.

Recycling:

Catch and dispose of used oil in a suitable container.

Observe country-specific waste-disposal regulations.

Unfasten oil filter cap (1) at hexagon (2).

NOTE: Slowly open oil filter cap.
If necessary, catch escaping engine oil in a cloth.

Fig 1: Identifying Oil Filter Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Remove and insert oil filter element (1) in direction of arrow.

Replace O-ring (2).

Installation:

Lubricate O-ring (2) with engine oil.

Tightening torque: 11 42 1AZ .

Fig 2: Removing Oil Filter Element

Courtesy of BMW OF NORTH AMERICA, INC.

Remove engine oil drain plug (1).

Installation:

Replace sealing ring.

Tightening torque: 11 13 1AZ .

Fig 3: Identifying Engine Oil Drain Plug

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

Checking engine oil level:

Park vehicle on a horizontal surface.