34 51 Slip Control System (ABS, ASC+T, DSC)
WARNING: This page is about a different variant/trim than selected.
SLIP CONTROL SYSTEMS SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Control unit on hydraulic unit | R55 / R56 | 5 Nm | ||
| 2AZ Hydraulic unit to bracket | R55 / R56 | 8 Nm | ||
| 3AZ Bracket to body | R55 / R56 | 19 Nm | ||
| 4AZ Pulse generator, front and rear, to steering knuckle / frame side member | R55 / R56 | 8 Nm | ||
| 5AZ DSC sensor to holder | R55 / R56 | M6 | 5 Nm | |
| 6AZ Bracket, DSC sensor, to body | R55 / R56 | M6 | 5 Nm | |
| 7AZ ASC/DSC control unit to hydraulic control unit | R55 / R56 | M4 | Replace screws Tighten in crosswise sequence |
|
| Size 1 | 1 Nm | |||
| Size 2 | 3 Nm |