33 55 Stabilizer Bar
WARNING: This page is about a different variant/trim than selected.
STABILIZER BAR TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Stabilizer link to stabilizer | R55, R56 | M10 | Replace nut | 56 Nm |
| 2AZ Stabilizer link to trailing arm | R55, R56 | M10 | Replace nut | 56 Nm |
| 3AZ Retaining bracket, stabilizer bar to rear axle support | R55, R56 | M8 | 19 Nm |