32 31 Steering Column
WARNING: This page is about a different variant/trim than selected.
STEERING COLUMN SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Lower steering column casing to steering column | R56, R55 | 4 Nm | ||
| 2AZ Lower steering spindle to steering gear | R56, R55 | Clean thread to remove all traces of screw securing adhesive Replace screw |
28 Nm | |
| 3AZ Steering column to cross-member | R56, R55 | 35 Nm |