32 21 Steering Arms
WARNING: This page is about a different variant/trim than selected.
STEERING ARMS TIGHTENING TORQUES SPECIFICATION
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Tie rod end to swivel bearing |
R55, R56 |
M12 |
Replace nut |
65 Nm |
| 2AZ Tie rod end to tie rod |
R55, R56 |
|
|
27.5 Nm |
| 3AZ Tie rod to steering gear |
R55, R56 |
|
|
76.5 Nm |