31 11 Front Axle Carrier/Support
WARNING: This page is about a different variant/trim than selected.
FRONT AXLE SUSPENSION TIGHTENING TORQUES SPECIFICATION
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Front axle carrier, middle, to body | R55, R56 | M12 | 100 Nm | |
| 2AZ Rear end of front axle carrier to body | R55, R56 | M12 | 100 Nm | |
| 3AZ Bracket, front bumper, to front axle carrier | R55, R56 | M12 | 100 Nm | |
| 4AZ Bracket, control arm rubber mount, to front axle carrier | R55, R56 | M14 | 165 Nm | |
| 5AZ Bracket, control arm rubber mount, to body | R55, R56 | M10 | Replace screws | |
| Jointing torque | 59 Nm | |||
| Torque angle | 90° |