36 10 Wheels
WARNING: This page is about a different variant/trim than selected.
WHEELS SPECIFICATION
| Steel and aluminium strip wheels | One-part alloy wheels | Two-part alloy wheels | ||
|---|---|---|---|---|
| Max. radial runout of tire Rim with tire |
max. mm | 1.6 | 1.1 | 1.3 |
| Max. axial runout or tire Rim with tire |
max. mm | 1.8 | 1.3 | 1.5 |
| Max. radial runout out rim | max. mm | 0.8 | 0.3 | 0.5 |
| Max. axial runout of rim | max. mm | 0.8 | 0.3 | 0.5 |
| Max. imbalance for each side (before balancing) | max. g | 90 for clamp weights 120 for stick-on weights | ||
| Permissible residual imbalance for each side (after balancing) | max. g | 4 | ||
| Elimination of imbalance: Up to 60 g with one weight or more than 60 g with two weights |