65 77 725 Removing and installing/replacing right B-pillar sensor

WARNING: This page is about a different variant/trim than selected.

WARNING: Comply with airbag safety regulations. See 72 SAFETY PRECAUTIONS AND GENERAL INFORMATION .
Incorrect handling can activate airbag and cause injury.

Necessary preliminary tasks:

Disconnect battery negative lead . See 12 00... INSTRUCTIONS FOR DISCONNECTING AND CONNECTING BATTERY .
Remove front seat belt reel . See 72 11 092 REMOVING AND INSTALLING/REPLACING REAR LEFT OR RIGHT SEAT BELT .

Release screw (1).

Release screw (2) and feed out sensor.

Tightening torque 65 77 3AZ.

Disconnect associated plug connection.

Installation:

Retaining lug (3) must not be damaged.

Make sure sensor is securely seated.

Fig 1: Identifying Screws And Lug

Courtesy of BMW OF NORTH AMERICA, INC.