II. Part replacement due to sudden leak
WARNING: This page is about a different variant/trim than selected.
(major leak, e.g. pipe break due to accident)
Procedure:
- Draw off A/C SYSTEM , then determine drawn-off refrigerant oil quantity
- Carry out part replacement
- Replace removed refrigerant fluid and additionally replace with new refrigerant fluid according to parts replaced:
- Compressor: refer to NOTES ON REPLACING COMPRESSOR
- Evaporator: 35 ml
- Capacitor: 35 ml
- Desiccant insert/dryer flask: 55 ml
- Each replaced refrigerant line: 35 ml
- Capacitor with integrated dryer: 55 ml
- Safety pressure switch and seals: no additional refrigerant fluid
- Evacuate and fill A/C SYSTEM