63 31 020 Removing and installing/replacing footwell light (splitdoor)

WARNING: This page is about a different variant/trim than selected.

Special tools required:

IMPORTANT: Follow instructions for handling light bulbs (interior lights ).

Lever footwell light frame (1) with special tool 64 1 020 in direction of arrow out of door trim panel (2).

Fig 1: Removing Footwell Light Frame With Special Tool 64 1 020

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Unclip footwell light (2) in direction of arrow from footwell light frame (3) and remove towards rear.

Replacement:

If necessary, remove bulb.

Fig 2: Uncliping Footwell Light

Courtesy of BMW OF NORTH AMERICA, INC.