63 10... Adjust The Fog Lights (With Electronic Headlight Adjustment Device Maha Lite 3)

Comply with TEST PREREQUISITES FOR HEADLIGHT ADJUSTMENT !

Refer to the manufacturer's operating instructions for the headlight adjustment device! 

Switch on the headlight adjustment device by pressing any button.

Press F1  button. The shown display screen appears.

Perform the following settings: 

1. The passenger car must be selected.
2. Enter the setting dimension for the headlight with buttons F1/F2: - 2, 0 % 
3. The right / left-hand traffic must be selected according to the country.
4. Select the fog light type with the F3  button:
   Fig 1: Display - Headlight Adjustment Screen

   Courtesy of BMW OF NORTH AMERICA, INC.
   • EC:  for halogen fog lights
   • EC LED:  for LED fog lights

The adjusted values are adopted for future measurements.

Briefly press  the button for the applicable side of the vehicle (1) until symbol (2) appears.

The following symbols appear in the display:

• OK (4): Adjustment is optimal.
• OK (3): Adjustment is within the legal tolerance range. ADJUST THE FOG LIGHT  until O. K. (4) is displayed.
• Arrows (5): Adjustment is incorrect. Use the arrows (5) to ADJUST THE FOG LIGHT  until O. K. (4) is displayed.

When a fog light adjustment is incorrect, arrows (5) will be displayed. Use the arrows (5) to.

Fig 2: Display - Fog Light Adjustment Screen

Courtesy of BMW OF NORTH AMERICA, INC.