62 10 130 Removing and installing complete navigation instrument cluster

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Read and comply with NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

Necessary preliminary tasks:

Release screws (1).

Fig 1: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Pull back complete instrument cluster slightly.

Fig 2: Identifying Instrument Cluster Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (1) and remove instrument cluster.

Fig 3: Identifying Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.