61 71 004 Adjusting windscreen washer spray nozzles

WARNING: This page is about a different variant/trim than selected.

Special tools required:

Mark contact points with adhesive tape on windscreen.

Actuate windscreen washer system.

The jet sprays must strike the areas of the markings.

Adjustment values in mm:

Fig 1: Identifying Windscreen Washer Spray Nozzles Adjustment

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, adjust left or right spray nozzle with special tool 00 9 200.

NOTE: If necessary, remove adhesive residue from windscreen.

Fill up with washer fluid.

Fig 2: Identifying Spray Nozzle And Special Tool (00 9 200)

Courtesy of BMW OF NORTH AMERICA, INC.