61 62 100 Adjusting spray nozzle for rear window washer unit

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Spray Nozzle Adjustment For Rear Window Washer Unit

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Rear window wipers must be in rest position.

Mark contact points (1) with adhesive tape (A=42 mm / B=100 mm).

Actuate rear window washer unit.

Jet sprays must strike markings.

If necessary, adjust spray nozzle (2).

IMPORTANT: Do not insert any pointed objects into spray nozzle (2) (risk of damage).

Adjust spray nozzle (2) with a suitable tool until jet sprays strike markings.

If necessary, remove adhesive residue from rear windows.

Fill up with washer fluid.