61 62 032 Replacing wiper arm for rear window wiper on left
WARNING: This page is about a different variant/trim than selected.
Special tools required:
- 61 6 210 . See GENERAL ELECTRICAL SYSTEM - SPECIAL TOOLS -- S CLUBMAN .
Open protective cap (1).
Slacken nut (2). Tightening torque 61 62 1AZ .
IMPORTANT:
Secure special tool 61 6 210
and wiper arm for rear window (1) against falling off during pressing-off procedure.
Press off wiper arm for rear window (1) with special tool 61 6 210.
Remove wiper blade for rear window wiper.
Installation:
Window wiper must be in rest position.
Adjust distance (A = 18 mm) between wiper arm for rear window (1) and lower rear window cover (2).