61 31 299 Removing and installing/replacing clutch switch module

Necessary preliminary tasks: 

• Remove trim for instrument panel at bottom left  . See 51 45 180 REMOVING AND INSTALLING/REPLACING BOTTOM RIGHT INSTRUMENT PANEL TRIM .

Disconnect plug connection (1).

Lever out clutch switch module (2) from clutch master cylinder (3) with screwdriver.

Installation: 

Clutch switch module is secured against incorrect installation.

Clutch switch module must snap audibly into place.

Fig 1: Identifying Plug Connection, Clutch Switch Module And Clutch Master Cylinder

Courtesy of BMW OF NORTH AMERICA, INC.