61 31 011 Removing and installing/replacing coil spring cassette (up to 07/2008)

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Release screws (1).

NOTE: Mark installation position of inner ring of volute spring to steering column switch cluster.

When replacing, carry over marking (2) to new part.

Fig 1: Identifying Volute Spring Cassette Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Expand catches (1) and remove volute spring cassette (2) from steering column switch cluster (3).

Fig 2: Identifying Catches, Volute Spring Cassette And Steering Column Switch Cluster

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guide pins (1) of volute spring must be correctly engaged in locators (2) for steering column switch cluster.

Fig 3: Identifying Guide Pins And Locators

Courtesy of BMW OF NORTH AMERICA, INC.