61 67 083 Removing and installing / replacing left or right high-pressure nozzle of headlight washer system

Necessary preliminary tasks: 

• Remove headlight  . See HEADLIGHTS .

Release screws (1).

Remove high-pressure nozzle (2) in direction of arrow.

Installation: 

Make sure guide (3) is correctly seated in lug (4).

Fig 1: Removing High-Pressure Nozzle

Courtesy of BMW OF NORTH AMERICA, INC.

Press holder for chrome trim (1) in direction of arrow off high-pressure nozzle (2).

Fig 2: Pressing Holder For Chrome Trim

Courtesy of BMW OF NORTH AMERICA, INC.