61 35 115 Removing and installing/replacing footwell module

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection) .

Necessary preliminary tasks:

Unscrew nuts (1).

Pull footwell module (2) forwards a little.

Fig 1: Identifying Footwell Module And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (1) and remove footwell module (2).

Fig 2: Identifying Plug Connections And Footwell Module

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out vehicle programming/coding.