61 35 015 Removing and installing (replacing) control unit for Car Access System

WARNING: This page is about a different variant/trim than selected.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection) .

NOTE: The comfort access system is a radio-based system and can be interfered with by radio waves from other systems (e.g. mobile phone).

Necessary preliminary tasks:

Release screw (1).

Disconnect plug connections (2) and remove control unit for Car Access System.

Fig 1: Identifying Remove Control Unit Plug Connections And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out programming/coding.