54 13 120 Removing and installing rear roller sun blind

Necessary preliminary tasks: 

• Remove GLASS SLIDE/TILT SUNROOF COVER AT REAR 

Release screws (1) on left and right.

Fig 1: Identifying Rear Glass Lid Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully raise rear glass lid mechanism (2).

Unlock retaining lugs and lift out roller sun blind (1).

Installation note: 

Retaining lugs on roller sun blind must not be damaged.

Fig 2: Raise Rear Glass Lid Mechanism (2) And Lifting Out Roller Sun Blind (1)

Courtesy of BMW OF NORTH AMERICA, INC.