54 13 052 Replacing seal on front glass slide/tilt sunroof cover
WARNING: This page is about a different variant/trim than selected.
Necessary preliminary tasks:
NOTE:
- Move front glass lid into fan position
NOTE:
Follow REPAIR INSTRUCTIONS for bonded seals on glass slide/tilt sunroof.
Pull seal off glass slide/tilt sunroof cover.
Installation note:
- Clean bonding surface with adhesive remover
- Press seal without stretching (squashing)
- Stick on seal in sections
IMPORTANT:
Do not touch bonding surface.
Surface temperature ≥ 20 °C
Incorrect bonding of the seal will result in leakage.
Surface temperature ≥ 20 °C
Incorrect bonding of the seal will result in leakage.