52 26 413 Removing and installing/replacing backrest cover for left or right rear seat
WARNING: This page is about a different variant/trim than selected.
Special tools required:
- 52 0 050
Necessary preliminary tasks:
- Remove LEFT OR RIGHT REAR SEAT BACKREST
- Remove LEFT OR RIGHT HEAD RESTRAINT
WARNING:
Backrest frames of rear seats have very sharp edges. Risk of injury and damage!
IMPORTANT:
Do not damage backrest cover.
Press backrest cover with padding next to guide downwards to expose detent lugs.
Unlock detent lugs and lift out guide.
Installation:
Replace faulty guides.
Release screw (1).
Tightening torque: 2 Nm
Remove cover from central hinge.
Lever out welt from backrest cover all round with screwdriver.
Remove backrest cover with padding from backrest frame.
Replacement only:
Detaching cover from padding:
- Disconnect all retainers in marked area
- Remove cover from padding
- Remove all remnants of retainers from cover and padding
Installation:
Insert new retainer (2) with special tool 52 0 050 and bend closed.
- Padding
- Retainer
- Trim thread in padding
- Trim thread in seat cover
- Seat cover