51 24 174 Removing and installing/replacing both strikers on left splitdoor

WARNING: This page is about a different variant/trim than selected.

Remove cover (1).

Fig 1: Removing Cover On Striker At Top

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten screws (1) and remove striker (2).

Installation:

Adjust striker.

Tightening torque 51 24 8AZ.

Fig 2: Unfasten Screws (1) And Remove Striker (2)

Courtesy of BMW OF NORTH AMERICA, INC.

Lower striker

Unfasten screws (1) and remove striker (2).

Installation:

Adjust striker.

Tightening torque 51 24 2AZ.

Fig 3: Identifying Screws (1)

Courtesy of BMW OF NORTH AMERICA, INC.