51 13 450 Removing and installing/replacing trim on left or right splitdoor

Release screws (1).

Fig 1: Identifying Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Press off trim (1) in area of clips (2).

Fig 2: Pressing Off Trim In Area Of Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

If necessary, replace faulty clips (1).

Make sure metal nuts (2) are correctly seated.

Fig 3: Identifying Metal Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Slacken screws (1)

Adjust gap dimensions of trim.

Replacement: 

Remove rear reflector.  See 63 14 120 REMOVING AND INSTALLING OR REPLACING REAR REFLECTOR .

Fig 4: Identifying Screws (1)

Courtesy of BMW OF NORTH AMERICA, INC.