51 22 226 Removing and installing/replacing inside door opener of clubdoor

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

NOTE: For purposes of clarity, the seat belt is shown removed.

Release screws (1) and remove door opener (2).

Tightening torque 51 22 6AZ.

Fig 1: Identifying Door Opener And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Disengage Bowden cables (1) and remove door opener (2).

Fig 2: Identifying Bowden Cables And Door Opener

Courtesy of BMW OF NORTH AMERICA, INC.