51 22 011 Replacing bottom clubdoor detent (striker)

WARNING: This page is about a different variant/trim than selected.

Lever out trim (1) with a suitable tool.

Fig 1: Lever Out Trim (1)

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove lock striker (2).

Installation:

Adjust door detent. See 41 5.... ADJUSTING DOOR .

Tightening torque 51 22 2AZ.

Fig 2: Identifying Lock Striker And Screws

Courtesy of BMW OF NORTH AMERICA, INC.