51 45... Removing and installing/replacing side cover from cover for air outlet vent

Special tools required: 

• 00 9 340 

Unclip cover (1) with special tool 00 9 340 in direction of arrow.

If necessary, disconnect associated plug connection.

Fig 1: Unclipping Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Catches (1) of cover (2) must not be damaged.

Replacement: 

If necessary, remove switch for passenger airbag deactivation  . See 61 31 068 REMOVING AND INSTALLING/REPLACING SWITCH FOR PASSENGER AIRBAG DEACTIVATION .

Fig 2: Identifying Catches Of Cover

Courtesy of BMW OF NORTH AMERICA, INC.